TLE9877QXA40

Mfr. #:
TLE9877QXA40
Mfr.:
Infineon Technologies
Product Type:
Motor Driver
Series:
MOTIX™ TLE987x
Package / Case:
48-VQFN
Description:
MOTIX™ TLE987x Arm® Cortex®-M3 motor-control MCU, 40 MHz, 3-phase bridge driver, 48-VQFN

Product Attributes

AttributeValue
Product CategoryMicrocontroller
Core Architecture32-bit Arm® Cortex®-M3
CPU Frequency40 MHz
SRAM6 KB
Motor bridge driverThree-phase gate driver for external N-channel MOSFETs
LIN transceiver1× LIN 2.2a
Supply Voltage5.5–28 V active; 3–5.5 V with reduced functionality
Operating Temperature-40 °C to +150 °C (junction), AEC-Q100
Flash64 KB
Package DetailsPG-VQFN-48-31, 48 pins

Product Details

TLE9877QXA40 combines a Cortex®-M3 MCU, LIN transceiver and three-phase MOSFET gate driver for BLDC motor control. Firmware generates PWM through CCU6, while an external N-channel MOSFET bridge carries the motor current. MOSFET selection must fit the charge-pump budget, which permits 100 nC total gate and added-capacitor charge at 25 kHz.

The integrated amplifier measures a low-side shunt through the 10-bit ADC. Programmable gain scales the current signal, and linear calibration including the shunt is required for high gain accuracy. The shunt value, amplifier range and ADC timing therefore form one measurement design.

Drain-source monitoring provides fault detection and shutdown of the external MOSFETs. Its thresholds, filtering and programmable cross-conduction timing need configuring for the selected bridge. The normal active supply range is 5.5–28 V, with reduced functionality below 5.5 V.

Quality · Shipping · Payment

Details

Quality Confirmation

Pre-shipment checks cover batch, package, labels and markings. Inspection photos and third-party inspection support are available on request.

Shipping

Worldwide delivery is supported. Carrier, lead time and buyer-appointed forwarder requirements are confirmed with the quotation.

Payment

Payment method, currency and trade terms are subject to the formal quotation or proforma invoice.