全部型号

TPS929240QDCPRQ1

制造商型号：
TPS929240QDCPRQ1
制造商：
Texas Instruments
产品类型：
LED and OLED Driver
系列：
TPS929240-Q1
封装：
38-HTSSOP
描述：
Automotive 24-channel high-side LED and OLED driver with FlexWire control in 38-pin HTSSOP.

产品属性

属性数值
Output CurrentUp to 100 mA per channel, set by resistor
Control InterfaceFlexWire over CAN physical layer; up to 16 devices per bus
LED Channels24 high-side current outputs
Device Supply Voltage4.5 to 40 V
LED Supply Voltage4 to 36 V
Dimming12-bit independent PWM; phase-shift control
Fault HandlingOpen/short LED diagnostics, watchdog, CRC and programmable fail-safe state
QualificationAEC-Q100 Grade 1; -40 to 125 °C ambient
Package Details38-pin HTSSOP (DCP)

产品详细说明

TPS929240QDCPRQ1 is Texas Instruments' 24-channel automotive high-side LED and OLED driver in a 38-pin HTSSOP package, with independently controlled outputs for pixel-style lighting.

Each channel can deliver up to 100 mA and has 12-bit PWM dimming, so a lamp controller can animate many segments without assigning a discrete driver to every LED group.

The FlexWire interface uses a CAN physical layer for off-board communication between lighting boards, addressing the noise and wiring constraints of distributed exterior lamps.

Programmable output current, phase-shifted PWM and the device's EEPROM settings let one hardware platform serve different brightness maps while retaining selected defaults at startup.

Open and short LED diagnostics, interface CRC and a watchdog-triggered fail-safe state give the host a defined response when a channel or communication link fails.

质量 · 运输 · 付款

详情

质量确认

发货前核对批次、封装、标签及丝印。可按需提供验货照片，并协助第三方检验。

运输

支持全球交付。承运商、交期及买方指定货代要求，在报价时确认。

付款

付款方式、币种及贸易条款，以正式报价或形式发票为准。

查看全部