TPS92691QPWPRQ1

制造商型号:
TPS92691QPWPRQ1
制造商:
Texas Instruments
产品类型:
LED Driver Controller
系列:
TPS92691-Q1
封装:
16-HTSSOP
描述:
Automotive multi-topology LED controller with rail-to-rail current sensing in 16-pin HTSSOP.

产品属性

属性数值
Input Voltage4.5 to 65 V
LED Channels1 controller channel
Supported TopologiesBuck, boost, buck-boost, SEPIC, Ćuk and flyback
Current SenseRail-to-rail; high-side or low-side sense resistor
LED Current AccuracyBetter than ±3% over 25 to 140 °C junction temperature
DimmingAnalog >15:1; series-FET PWM >1000:1
Fault MonitoringContinuous current-monitor output; UVLO, OVP, current limit and thermal protection
QualificationAEC-Q100 Grade 1; -40 to 125 °C ambient
Package Details16-pin HTSSOP (PWP)

产品详细说明

TPS92691QPWPRQ1 is Texas Instruments' automotive LED driver controller in a 16-pin HTSSOP package, intended to control an external power stage rather than supply LED current directly.

Buck, boost and related topologies let the lighting designer choose whether the LED string voltage must sit above or below the battery rail, while the 4.5 to 65 V input span covers a wide automotive supply envelope.

Its rail-to-rail current-sense amplifier accepts high-side or low-side sensing and supports better than three-percent LED-current accuracy under the data sheet's stated junction-temperature conditions.

Analog current adjustment provides a dimming range above 15:1, and an optional series-FET gate drive supports PWM contrast above 1000:1 when the lamp needs much deeper modulation.

A continuous current-monitor output lets the host detect an open or shorted LED load while the controller's overvoltage and switch-current protections guard the external power stage.

质量 · 运输 · 付款

详情

质量确认

发货前核对批次、封装、标签及丝印。可按需提供验货照片,并协助第三方检验。

运输

支持全球交付。承运商、交期及买方指定货代要求,在报价时确认。

付款

付款方式、币种及贸易条款,以正式报价或形式发票为准。