DRV8824PWPR

制造商型号:
DRV8824PWPR
制造商:
Texas Instruments
产品类型:
Stepper Motor Driver
系列:
DRV8824
封装:
28-HTSSOP
描述:
45 V bipolar stepper motor driver, 1.6 A, 1/32 microstepping, 28-HTSSOP

产品属性

属性数值
Output Current1.6 A maximum at 24 V and TA = 25 °C with proper heatsinking
Control InterfaceSTEP/DIR with hardware mode pins
ProtectionOvercurrent, thermal shutdown and motor-supply undervoltage lockout
Operating Temperature−40 °C to +85 °C
Motor TypeBipolar stepper motor
Motor Supply Voltage8.2 V to 45 V
Full BridgesTwo integrated H bridges
MicrosteppingFull step through 1/32 step
Current RegulationFixed-frequency PWM using external sense resistors and xVREF
Decay ModesSlow, fast and mixed decay
Package DetailsPowerPAD™ PWP package, 4.4 × 9.7 mm body, 0.65 mm pitch

产品详细说明

DRV8824PWPR integrates two MOSFET H bridges and a microstep indexer for one bipolar stepper motor from an 8.2 V to 45 V motor supply. The stated 1.6 A maximum is specified at 24 V and 25 °C with proper heatsinking, so winding current, bridge losses, ambient temperature and the exposed-pad PCB thermal path determine the usable continuous operating point.

STEP and DIR commands advance the built-in indexer from full step through 1/32 step. Each winding's chopping threshold is set by its reference voltage and external sense resistor, and slow, fast or mixed decay determines how current falls between drive intervals. These choices jointly affect current tracking, torque ripple and acoustic behavior at the intended motor inductance and step rate.

Overcurrent, undervoltage and thermal faults disable drive and assert nFAULT, but they do not replace correct current scaling or thermal design. The 28-pin PowerPAD™ package must transfer heat into board copper, and firmware or control logic must provide the required reset or sleep sequence after a latched protection event.

质量 · 运输 · 付款

详情

质量确认

发货前核对批次、封装、标签及丝印。可按需提供验货照片,并协助第三方检验。

运输

支持全球交付。承运商、交期及买方指定货代要求,在报价时确认。

付款

付款方式、币种及贸易条款,以正式报价或形式发票为准。