SIT3490EESA

制造商型号:
SIT3490EESA
制造商:
SIT
产品类型:
RS-485 / RS-422 Transceiver
系列:
SIT3490E
封装:
SOP-8
描述:
14 Mbps full-duplex RS-485/RS-422 transceiver with a 3.0 to 5.5 V supply and 1/8-unit-load receiver.

产品属性

属性数值
Data RateUp to 14 Mbps
Supply Current240 uA typical, 400 uA maximum; DI=0 or VCC; typical VCC=3.3 V, ambient 25 C
Operating Temperature-40 to +125 C ambient
ProtocolTIA/EIA-485 and RS-422; full duplex
Transmitter / Receiver Channels1 driver / 1 receiver
Supply Voltage (VCC)3.0 to 5.5 V
Logic InterfaceDI high input >=2.0 V; low input <=0.8 V; referenced to VCC
Bus Fault VoltageReceiver A/B absolute maximum: -8 to +13 V
Receiver Common-Mode Range-7 to +12 V
Operating ModesFull-duplex driver and receiver; no separate DE/RE or shutdown control pins
Propagation DelayDriver 15 ns typical, 35 ns maximum at RL=54 ohm, CL=100 pF; receiver 60 ns typical, 90 ns maximum; VCC=3.3 V, 25 C typical conditions
ProtectionDriver current limit, over-voltage protection; bus pins HBM ESD +/-15 kV per datasheet
Receiver Threshold-200 to +200 mV; common mode -7 to +12 V
Bus Loading1/8 unit load; up to 256 transceivers
Receiver Input Resistance96 kohm minimum
Differential Output Voltage1.5 V minimum at RL=54 or 100 ohm
Package Details8-pin SOP; body 4.9 x 3.9 mm typical; lead span 6.0 mm typical; pitch 1.27 mm; height 1.8 mm maximum

产品描述

SIT3490EESA contains independent transmit and receive paths for a full-duplex RS-485 or RS-422 link. Its eight-pin interface has separate Y/Z driver outputs and A/B receiver inputs, with no separate driver-enable or receiver-enable pins. The connection therefore differs from a two-wire half-duplex transceiver whose transmitter must be switched on and off.

The receiver presents a one-eighth unit load, permitting up to 256 such loads on a bus under the documented loading model. Its -7 to +12 V receiver common-mode range and 14 Mbps data-rate capability are separate selection limits; a particular cable and termination still determine the link's operating conditions. The EESA order is the SOP-8 package and operates from 3.0 to 5.5 V.

质量 · 运输 · 付款

质量确认

发货前核对批次、封装、标签及丝印。可按需提供验货照片,并协助第三方检验。

运输

支持全球交付。承运商、交期及买方指定货代要求,在报价时确认。

付款

付款方式、币种及贸易条款,以正式报价或形式发票为准。