PCA82C250T/YM,118

制造商型号:
PCA82C250T/YM,118
制造商:
NXP Semiconductors
产品类型:
CAN Transceiver
系列:
PCA82C250
封装:
8-SO8
描述:
High-speed CAN transceiver, ISO 11898, up to 1 MBd, 8-SO8

产品属性

属性数值
ChannelsOne CAN transmitter and one CAN receiver
Supply Voltage4.5 V to 5.5 V
Operating Temperature−40 °C to +125 °C ambient
ProtocolCAN physical layer, ISO 11898
SpeedUp to 1 MBd
Operating ModesHigh-speed, slope control and low-current standby via Rs pin
ProtectionBus transient protection, thermal protection and short-circuit protection to battery and ground
Package Details8-lead SO8, 4.9 × 3.9 × 1.75 mm body, 1.27 mm pitch, SOT96-1

产品详细说明

PCA82C250T/YM,118 connects a CAN protocol controller to a two-wire differential CAN bus. It translates TXD and RXD logic into CANH and CANL signaling at rates up to 1 MBd from a 4.5–5.5 V supply. Compatibility with the ISO 11898 physical layer makes the transceiver suitable for established high-speed CAN nodes, subject to the network's cabling and termination.

The Rs pin selects high-speed switching, resistor-controlled slope limiting or low-current standby. Slope control can reduce radiated interference at the cost of slower edges, while standby disables transmission and retains low-current bus detection. Thermal limiting, bus transient protection and short-circuit protection address automotive bus faults. The exact ,118 order uses the PCA82C250T die in an 8-lead SOT96-1 SO8 package.

质量 · 运输 · 付款

详情

质量确认

发货前核对批次、封装、标签及丝印。可按需提供验货照片,并协助第三方检验。

运输

支持全球交付。承运商、交期及买方指定货代要求,在报价时确认。

付款

付款方式、币种及贸易条款,以正式报价或形式发票为准。