ADM3054BRWZ-RL7

制造商型号:
ADM3054BRWZ-RL7
制造商:
Analog Devices
产品类型:
Isolated CAN Transceiver
封装:
16-SOIC
描述:
1 Mbps signal-isolated CAN transceiver with separate logic-side and bus-side supplies and bus-pin protection.

产品属性

属性数值
Data Rate1 Mbps maximum
Isolation Voltage5,000 V rms for 1 minute, UL 1577
Common-Mode Transient Immunity25 kV/µs minimum, VCM = 1 kV, 800 V transient magnitude
Operating Temperature−40°C to +125°C
ProtocolCAN physical layer, ISO 11898
Logic-Side SupplyVDD1: 3.0 to 5.5 V
Bus-Side SupplyVDD2: 4.75 to 5.25 V
Bus Power MonitoringVDD2SENSE output detects loss of VDD2
ProtectionCurrent limiting, thermal shutdown, and CANH/CANL short protection in 24 V systems
Creepage And Clearance7.8 mm minimum each
Standard Packing400 pieces per reel
Package Details16-lead wide-body SOIC (RW-16), 10.30 × 7.50 mm nominal body, 1.27 mm pitch

产品详细说明

ADM3054BRWZ-RL7 connects a CAN protocol controller to an ISO 11898 bus across a galvanic isolation barrier. Its integrated digital isolator separates the controller's logic domain from the transceiver's bus domain while passing CAN signals at rates up to 1 Mbps.

Both domains need power. The logic side accepts 3.0 V to 5.5 V, and the bus side requires a separate 4.75 V to 5.25 V supply. VDD2SENSE reports loss of bus-side power to the controller, providing a diagnostic when the bus domain is unpowered.

Bus-fault protection addresses accidental CANH or CANL shorts to power or ground in 24 V systems. Current limiting and thermal shutdown protect the transceiver during these faults.

质量 · 运输 · 付款

详情

质量确认

发货前核对批次、封装、标签及丝印。可按需提供验货照片,并协助第三方检验。

运输

支持全球交付。承运商、交期及买方指定货代要求,在报价时确认。

付款

付款方式、币种及贸易条款,以正式报价或形式发票为准。