ADTR1107ACCZ-R7

制造商型号:
ADTR1107ACCZ-R7
制造商:
Analog Devices
产品类型:
RF Front-End IC
系列:
ADTR1107
封装:
24-LGA
描述:
6–18 GHz RF front end with PA, LNA and SPDT switch, 24-LGA

产品属性

属性数值
Frequency Range6–18 GHz
IntegrationPower amplifier, low-noise amplifier, reflective SPDT switch and directional coupler
Transmit Gain21.5 dB typical at 6–14 GHz, 22 dB typical at 14–18 GHz, VDD_PA = 5 V, IDQ_PA = 220 mA, TA = 25 °C, receive path off
Transmit Saturated Output Power25 dBm typical at 6–14 GHz, 24 dBm typical at 14–18 GHz, VDD_PA = 5 V, IDQ_PA = 220 mA, TA = 25 °C, receive path off
Transmit Output P1dB23 dBm typical at 6–14 GHz, 21.5 dBm typical at 14–18 GHz, VDD_PA = 5 V, IDQ_PA = 220 mA, TA = 25 °C, receive path off
Receive Gain17.5 dB typical at 6–14 GHz, 18 dB typical at 14–18 GHz, self biased at VDD_LNA = 3.3 V, TA = 25 °C, transmit path off
Receive Noise Figure2.5 dB typical at 6–14 GHz, 3 dB typical at 14–18 GHz, self biased at VDD_LNA = 3.3 V, TA = 25 °C, transmit path off
RF Impedance50 Ω internally matched I/O
PA Supply Voltage3.3–5.5 V, 5 V nominal
LNA Supply Voltage2.0–3.6 V, 3.3 V nominal
Switch BiasVDD_SW = +3.3 V and VSS_SW = −3.3 V
Control InterfaceCMOS/LVTTL CTRL_SW, low selects transmit and high selects receive
Quiescent CurrentPA 220 mA typical at VDD_PA = 5 V with gate bias adjusted, LNA 80 mA typical at VDD_LNA = 3.3 V with VGG_LNA = 0 V
RF Settling Time17 ns typical to within 0.1 dB of final RF output from 50% CTRL_SW, nominal bias at TA = 25 °C
Operating Temperature−40 °C to +85 °C
Package DetailsCC-24-8, 5 × 5 × 1.13 mm, exposed pad

产品详细说明

ADTR1107ACCZ-R7 combines a power amplifier, low-noise amplifier and reflective SPDT switch for a 6–18 GHz transmit/receive front end. A single control input selects the transmit-input-to-antenna path or the antenna-to-receive-output path, supporting a shared antenna connection in phased-array and radar systems. Internally matched 50 Ω RF ports simplify the RF interface.

The amplifiers have separate drain and gate bias connections. The PA gate voltage sets its quiescent current, while grounding VGG_LNA selects self-biased LNA operation. The switch also requires positive and negative 3.3 V rails. The board must implement the recommended bias sequence, including establishing the PA gate bias before its drain supply and applying the RF input after bias setup.

The coupled transmit output can feed an external power detector for transmit-level monitoring. Its coupling changes with frequency, so detector calibration must account for the operating band. Transmit compression and receive noise figure also vary between the specified sub-bands, making the intended frequency and bias point part of the RF link budget.

质量 · 运输 · 付款

详情

质量确认

发货前核对批次、封装、标签及丝印。可按需提供验货照片,并协助第三方检验。

运输

支持全球交付。承运商、交期及买方指定货代要求,在报价时确认。

付款

付款方式、币种及贸易条款,以正式报价或形式发票为准。