W25Q128JVEIM

制造商型号:
W25Q128JVEIM
制造商:
Winbond Electronics
产品类型:
Serial NOR Flash
系列:
W25Q-JV
封装:
8-WSON
描述:
128 Mbit SPI/QPI NOR flash, 2.7–3.6 V, DTR-capable, 8-WSON

产品属性

属性数值
Density128 Mbit (16 MiB)
InterfaceStandard, Dual and Quad SPI; QPI and DTR, IM option
Supply Voltage2.7–3.6 V
Operating Temperature−40 °C to +85 °C, industrial I grade
STR Read Clock133 MHz maximum at 3.0–3.6 V; 104 MHz maximum at 2.7–3.0 V
DTR Read Clock66 MHz maximum at 3.0–3.6 V; 52 MHz maximum at 2.7–3.0 V
Standard Read Clock50 MHz maximum for 03h
Program Page Size256 bytes; 65,536 pages
Erase Geometry4 KiB sectors, 32 KiB / 64 KiB blocks, chip erase
Addressing24-bit byte addressing covers the 16 MiB array
JEDEC IDEF 70 18h, IM option
Quad EnableQE writable, factory default 0 for IM
Security64-bit unique ID and three 256-byte security registers with OTP lock
SuspendProgram/erase suspend and resume
Package DetailsE package, 8-pad WSON, 8 × 6 mm

产品详细说明

W25Q128JVEIM stores 16 MiB of boot code or persistent data in an 8 × 6 mm WSON package. Its IM option supports QPI and DTR reads, with Quad Enable initially clear. Firmware therefore needs the correct IM device identity and interface setup before using all four data lines.

The transfer setting depends on the supply rail. At 3.0–3.6 V, the documented maxima are 133 MHz STR and 66 MHz DTR, falling to 104 MHz and 52 MHz at 2.7–3.0 V. A controller must also apply the chosen instruction and dummy-clock sequence, so a frequency change alone does not establish a valid read configuration.

The complete array fits a three-byte address. Updates use up to 256 bytes per program page and erase storage in larger sectors or blocks. Firmware must preserve other data in the erase unit and keep a page-program transaction inside its page boundary.

质量 · 运输 · 付款

详情

质量确认

发货前核对批次、封装、标签及丝印。可按需提供验货照片,并协助第三方检验。

运输

支持全球交付。承运商、交期及买方指定货代要求,在报价时确认。

付款

付款方式、币种及贸易条款,以正式报价或形式发票为准。