DS90UB953TRHBRQ1

制造商型号:
DS90UB953TRHBRQ1
制造商:
Texas Instruments
产品类型:
CSI-2 to FPD-Link III Serializer
系列:
DS90UB953-Q1
封装:
VQFN-32
描述:
CSI-2 to FPD-Link III Serializer

产品属性

属性数值
Supply VoltageVDD / VDDD / VDDDRV / VDDPLL 1.71 to 1.89 V; I2C pull-up range 1.71 to 3.6 V
Operating Temperature-40 to +105°C ambient; continuous PLL temperature-ramp restrictions and software initialization conditions in section 9.1.1 apply
Input InterfaceCSI-2 v 1.3 / D-PHY v 1.2; up to 4 lanes at 80 to 832 Mbps/lane; 4 virtual channels
Link RateFPD-Link III forward line rate 4.16 Gbps; bidirectional control channel 50 Mbps; payload rate is lower than line rate
Power Consumption160 mA typical / 225 mA maximum total at 416-MHz CSI clock, 4-lane checkerboard pattern; approximately 288 mW typical at 1.8 V
Reference Clock25 to 104 MHz input; synchronous deserializer-derived or nonsynchronous local clock modes per clocking configuration
ControlI2C camera control, GPIO and programmable sensor clock over bidirectional link
Package DetailsVQFN, RHB, 32 terminals; 5 x 5 mm body; 0.5 mm pitch; 1.0 mm maximum height

产品描述

DS90UB953TRHBRQ1 transports a CSI-2 camera stream over FPD-Link III with a simultaneous bidirectional control path. Its four input lanes accept up to 832 Mbps each; the 4.16-Gbps cable line rate includes transport overhead.

A single 1.8-V device supply and remote sensor-clock support simplify a camera power and timing arrangement. Clock mode, startup configuration and continuous temperature-ramp restrictions must be considered together when qualifying operation.

质量 · 运输 · 付款

质量确认

发货前核对批次、封装、标签及丝印。可按需提供验货照片,并协助第三方检验。

运输

支持全球交付。承运商、交期及买方指定货代要求,在报价时确认。

付款

付款方式、币种及贸易条款,以正式报价或形式发票为准。