DS90UB941ASRTDRQ1

制造商型号:
DS90UB941ASRTDRQ1
制造商:
Texas Instruments
产品类型:
MIPI DSI to FPD-Link III Serializer
系列:
DS90UB941AS-Q1
封装:
VQFN-64
描述:
MIPI DSI to FPD-Link III Serializer

产品属性

属性数值
Supply VoltageVDD11 1.045 to 1.155 V; VDD18 1.71 to 1.89 V; VDDIO 1.71 to 1.89 V or 3.0 to 3.6 V; I2C pull-up 1.71 to 3.6 V
Operating Temperature-40 to +105 °C ambient; AEC-Q100 Grade 2
Direction / LinkDual MIPI DSI receiver to one or two FPD-Link III serial outputs
Link RateFPD-Link III output up to 3.675 Gbps per lane in dual-link operation; serial line rate includes framing overhead
Video InterfaceTwo DSI ports, up to 4 data lanes each; 150 Mbps to 1.5 Gbps per DSI lane; 24-bit video
Pixel ClockUp to 105 MHz single-link or 210 MHz dual-link; symmetric/asymmetric video splitting
Control InterfaceI2C up to 1 MHz; full-duplex control and I2S audio transported over FPD-Link III
Reference ClockExternal REFCLK 25 to 210 MHz, +/-100 ppm including aging when reference-clock mode is used; DSI clock 75 to 750 MHz
Power Consumption800 mW maximum at single 4-lane DSI input, DSI clock 630 MHz/pixel clock 210 MHz, dual FPD-Link III 3.675 Gbps, checkerboard, RL = 100 ohm
Package DetailsVQFN, RTD, 64 terminals; 9 x 9 mm body; 0.5 mm pitch; 0.9 mm maximum height

产品描述

Dual DSI input ports and symmetric or asymmetric splitting allow a video source to feed multiple display paths. The FPD-Link III streams carry embedded timing and bidirectional control, reducing the separate signals that must cross the display harness.

The DSI input-lane rate, pixel-clock throughput and FPD-Link serial line rate describe different parts of the transport. Clock source and single- versus dual-link mode must be selected together with the required display bandwidth.

质量 · 运输 · 付款

质量确认

发货前核对批次、封装、标签及丝印。可按需提供验货照片,并协助第三方检验。

运输

支持全球交付。承运商、交期及买方指定货代要求,在报价时确认。

付款

付款方式、币种及贸易条款,以正式报价或形式发票为准。