SIT1057QTK/3

制造商型号:
SIT1057QTK/3
制造商:
SIT
产品类型:
CAN FD Transceiver
系列:
SIT1057Q
封装:
DFN-8
描述:
5 Mbps CAN FD transceiver with silent mode and a dedicated VIO interface.

产品属性

属性数值
Data RateUp to 5 Mbps CAN FD data phase
Supply CurrentVCC silent-mode current: 1.2 mA maximum; S=VCC, TXD=VIO. VIO silent current: 3 uA typical, 16 uA maximum; VCC=VIO=5 V, 25 C typical conditions
Operating Temperature-40 to +125 C ambient; -40 to +150 C junction
ProtocolCAN FD; ISO 11898-2:2016
Transmitter / Receiver Channels1 driver / 1 receiver
Supply Voltage (VCC)4.75 to 5.25 V
Logic InterfaceVIO=2.95 to 5.25 V; supports 3.3 V and 5 V MCUs
Bus Fault VoltageCANH/CANL: -40 to +40 V absolute bus-pin limit
Receiver Common-Mode Range-12 to +12 V
Operating ModesNormal and silent/listen-only, controlled by S pin; no standby wake-up mode
Propagation DelayTXD-to-RXD loop: 80/90 ns typical, 220 ns maximum; RL=60 ohm, CL=100 pF, CRXD=15 pF, VCC=VIO=5 V, 25 C typical conditions
ProtectionTXD dominant timeout, thermal shutdown and VCC/VIO undervoltage protection
Receiver ThresholdRecessive <=0.5 V; dominant >=0.9 V in normal mode; common mode -12 to +12 V
QualificationAEC-Q100 qualified, per manufacturer datasheet
Package Details8-terminal DFN; 3.0 x 3.0 mm typical; pitch 0.65 mm; height 0.75 mm typical, 0.8 mm maximum

产品描述

SIT1057QTK/3 uses the S control input to select normal communication or silent operation. In silent mode the transmitter is disabled while the receiver remains available, allowing the controller to observe bus traffic without driving the CAN lines. This mode serves a different purpose from a standby transceiver that waits for a wake-up request.

The /3 option exposes VIO for a 3.3 V or 5 V MCU, and the QTK order uses an eight-terminal DFN with a 3 by 3 mm body. Its 5 Mbps CAN FD data-phase capability applies with a 4.75 to 5.25 V bus supply; the package drawing specifies a 0.65 mm terminal pitch and a 0.8 mm maximum height.

质量 · 运输 · 付款

质量确认

发货前核对批次、封装、标签及丝印。可按需提供验货照片,并协助第三方检验。

运输

支持全球交付。承运商、交期及买方指定货代要求,在报价时确认。

付款

付款方式、币种及贸易条款,以正式报价或形式发票为准。