SDINBDA6-32G-XI1

制造商型号:
SDINBDA6-32G-XI1
制造商:
SanDisk
产品类型:
eMMC Storage
系列:
iNAND IX EM132
封装:
153-TFBGA
描述:
32 GB industrial eMMC 5.1 managed NAND, HS400, −40 to +85 °C, 153-TFBGA

产品属性

属性数值
InterfaceeMMC 5.1 HS400
Operating Temperature−40 °C to +85 °C, XI1 industrial extended
Capacity32 GB decimal; actual user capacity is lower
NAND Technology3D NAND BiCS3, 64 layers
Core Supply VoltageVCC 2.7–3.6 V
I/O Supply VoltageVCCQ 1.7–1.95 V or 2.7–3.6 V
PartitioningSmart Partitioning with TLC/SLC policies, boot, RPMB, user and enhanced user areas
Flash ManagementController ECC, wear levelling and bad-block management
Health / MaintenanceAdvanced health report and manual refresh
Sequential Read / WriteUp to 300/180 MB/s at 32 GB, manufacturer internal testing; host and capacity configuration dependent
Random Read / WriteUp to 14K/12K IOPS at 32 GB, manufacturer internal testing; host and capacity configuration dependent
TLC EnduranceUp to 87 TBW at 100% TLC
SLC EnduranceUp to 860 TBW at 100% SLC; usable capacity changes
Endurance ConditionsBrief cites JEDEC client workload; maximum TBW figures use sequential writes with idle time
Package Details153-ball TFBGA, 11.5 × 13.0 × 1.0 mm

产品详细说明

SDINBDA6-32G-XI1 provides 32 GB of industrial eMMC 5.1 storage with a controller that manages NAND error correction, wear levelling and bad blocks. The host accesses managed storage while the device handles the underlying flash media. Smart Partitioning allows different TLC and SLC usage policies for data with different write requirements.

Selecting an SLC configuration changes usable capacity and endurance together. The 32 GB brief lists up to 87 TBW for 100% TLC and up to 860 TBW for 100% SLC. Its endurance note references the JEDEC client workload and qualifies the maximum figures with sequential writes and idle time, so these values depend on the planned configuration and workload.

The XI1 order covers −40 °C to +85 °C and keeps the core and I/O rails separate. Health reporting and manual refresh support maintenance after deployment, with the host responsible for scheduling the supported procedures. The advertised HS400 interface still requires the corresponding host timing and voltage setup.

质量 · 运输 · 付款

详情

质量确认

发货前核对批次、封装、标签及丝印。可按需提供验货照片,并协助第三方检验。

运输

支持全球交付。承运商、交期及买方指定货代要求,在报价时确认。

付款

付款方式、币种及贸易条款,以正式报价或形式发票为准。