MCP3208T-CI/SL

制造商型号:
MCP3208T-CI/SL
制造商:
Microchip Technology
产品类型:
SAR ADC
系列:
MCP3208
封装:
16-SOIC
描述:
12-bit, 8-channel SPI SAR ADC, up to 100 kS/s at 5 V, 16-SOIC

产品属性

属性数值
ArchitectureSuccessive approximation (SAR)
Resolution12 bits
Input Channels8 single-ended or 4 pseudo-differential pairs, selected per conversion
ReferenceExternal VREF input sets conversion full scale
InterfaceSPI-compatible, modes 0,0 and 1,1
Supply Voltage2.7–5.5 V single supply
Operating Temperature−40 °C to +85 °C, industrial I grade
Sampling Rate100 kS/s maximum at VDD = VREF = 5 V; 50 kS/s maximum at VDD = VREF = 2.7 V
Integral Nonlinearity±2 LSB maximum, C grade, VDD = VREF = 5 V
Differential Nonlinearity±1 LSB maximum, VDD = VREF = 5 V
Serial Clock2 MHz maximum at VDD = 5 V; 1 MHz maximum at VDD = 2.7 V
Data Format12-bit straight binary
Acquisition Time1.5 serial clock cycles
Pseudo-Differential InputIN− limited to VSS ±100 mV
Package DetailsSL narrow-body SOIC, 16 leads, 3.90 mm body width

产品详细说明

MCP3208T-CI/SL converts eight sensor or monitoring inputs through a 12-bit SAR ADC and an SPI-compatible interface. A channel-selection command precedes each conversion, allowing the controller to choose eight single-ended inputs or four pseudo-differential pairs. The sampling budget is shared among the inputs that the controller scans.

Maximum throughput is 100 kS/s with VDD and VREF at 5 V, falling to 50 kS/s at 2.7 V. The input driver must charge the sampling capacitor during the 1.5-clock acquisition interval, so higher source impedance can increase conversion error. Selecting the clock rate therefore requires both the supply-voltage limit and the signal source's settling behavior.

The external reference sets the input span and code size, while its stability affects conversion accuracy. In pseudo-differential operation, IN− must remain within 100 mV of ground, making this mode suitable for small ground-related offsets. The C accuracy grade specifies ±2 LSB maximum INL under the datasheet's 5 V supply/reference conditions.

质量 · 运输 · 付款

详情

质量确认

发货前核对批次、封装、标签及丝印。可按需提供验货照片,并协助第三方检验。

运输

支持全球交付。承运商、交期及买方指定货代要求,在报价时确认。

付款

付款方式、币种及贸易条款,以正式报价或形式发票为准。