TLE9891QTA61

制造商型号:
TLE9891QTA61
制造商:
Infineon Technologies
产品类型:
Motor Driver
系列:
MOTIX™ TLE989x
封装:
48-TQFP
描述:
Automotive Arm® Cortex®-M3 motor-control SoC, 60 MHz, 128 KB Flash, 3-phase bridge driver, 48-TQFP

产品属性

属性数值
Core Architecture32-bit Arm® Cortex®-M3
CPU FrequencyUp to 60 MHz
Flash128 KB
SRAM16 KB
Motor bridge driverThree-phase bridge driver with charge pump and PWM generation
InterfacesCAN 2.0, PWM and synchronous serial communication
Current MeasurementIntegrated low-side shunt current-sense amplifier
Supply Voltage5.5 to 28 V
Junction Temperature−40 °C to +150 °C
Functional SafetyISO 26262-compliant safe switch-off path, ASIL B classification
QualificationAutomotive
Package DetailsInfineon PG-TQFP-48 automotive package

产品详细说明

TLE9891QTA61 combines a 60 MHz Arm® Cortex®-M3, 128 KB of Flash, 16 KB of RAM, CAN 2.0 communication and a three-phase gate-driver subsystem for automotive BLDC motor control. The integrated charge pump and PWM generation drive an external MOSFET bridge, while firmware implements commutation and control. MOSFET gate charge, dead time and the 5.5–28 V supply range remain system-level design conditions.

A low-side shunt amplifier and on-chip conversion resources provide current feedback for the control loop. Their sampling point must align with PWM switching so the measured current represents the desired phase interval rather than a switching transient. The exact QTA61 variant operates to a 150 °C junction limit in PG-TQFP-48, making PCB thermal design part of the motor-current decision.

Infineon classifies the device's safe switch-off path for ISO 26262 ASIL B use. That path supports a safety architecture but does not by itself complete the application-level safety case. Fault handling, external bridge behavior, diagnostics and software reactions still need to be allocated and verified for the target motor system.

质量 · 运输 · 付款

详情

质量确认

发货前核对批次、封装、标签及丝印。可按需提供验货照片,并协助第三方检验。

运输

支持全球交付。承运商、交期及买方指定货代要求,在报价时确认。

付款

付款方式、币种及贸易条款,以正式报价或形式发票为准。