SAK-TC387QP-160F300S AD

制造商型号:
SAK-TC387QP-160F300S AD
制造商:
Infineon Technologies
产品类型:
MCU
系列:
AURIX™ TC3xx
封装:
292-LFBGA
描述:
AURIX™ TC3xx TriCore™ MCU, up to 300 MHz, 10 MB Flash, 292-LFBGA

产品属性

属性数值
Core ArchitectureInfineon TriCore™ TC1.6.2 (32-bit)
CPU Frequency300 MHz maximum per TriCore™ CPU
Program Flash10 MB
SRAM1376 KB excluding EMEM and cache; ECC protected
Supply Voltage5 V or 3.3 V (single supply)
Operating Temperature-40 to +125 °C ambient (SAK grade)
Core Count4 TriCore™ CPUs plus 2 checker cores
Communication12 CAN FD nodes; 24 LIN-capable ASCLIN; 2 FlexRay modules/4 channels; 1 Gbit/s Ethernet; 5 QSPI
SafetyISO 26262 ASIL-D / SIL-3 support; eVita Full HSM
Data Flash512 KB
ADC resources5 primary groups/40 channels; 4 secondary groups/60 channels; 6 EDSADC channels
DMA channels128
Lifecycle StatusDiscontinued (AD step)
Package DetailsPG-LFBGA-292-11

产品详细说明

SAK-TC387QP-160F300S AD is the AD-step four-core TC38x MCU with 10 MB of program flash. Two checker cores monitor selected application CPUs, and ECC protects the stored information. Fault handling still requires the system to configure its monitors and responses for the control task.

Its RAM is spread across local scratchpads, distributed local memories, a shared LMU and a DAM area. CPU0 and CPU1 have larger data scratchpads than CPU2 and CPU3, so the 1,376 KB total needs a region-by-region placement plan. Communication buffers must fit that plan along with the application working sets.

Infineon lists this exact AD order as discontinued. Maintaining an existing board therefore requires the AD step and its software assumptions to be identified during sourcing. A move to another step requires a review of its applicable errata and firmware configuration, as well as the matching pin assignment.

质量 · 运输 · 付款

详情

质量确认

发货前核对批次、封装、标签及丝印。可按需提供验货照片,并协助第三方检验。

运输

支持全球交付。承运商、交期及买方指定货代要求,在报价时确认。

付款

付款方式、币种及贸易条款,以正式报价或形式发票为准。