MT29F2G01ABAGDWB-IT:G

Mfr. #:
MT29F2G01ABAGDWB-IT:G
Mfr.:
Micron Technology
Product Type:
Serial NAND Flash Memory
Series:
MT29F
Package / Case:
8-U-PDFN
Description:
MT29F2G01ABAGDWB-IT:G is a 2 Gbit Serial NAND Flash Memory from Micron, supplied in 8-U-PDFN.

Product Attributes

AttributeValue
Density2 Gbit
InterfaceSPI; x1, x2 and x4 transfer modes
Clock Frequency133 MHz maximum; dual/quad I/O cache reads BBh and EBh: 108 MHz maximum
Page Size2048 + 128 bytes per page; 64 pages per block
Endurance100,000 program/erase cycles
Data RetentionUncycled: 10 years at 85 °C, 24/7
Supply Voltage2.7–3.6 V; 3.3 V nominal
Operating Temperature−40 to +85 °C ambient
Memory TechnologySLC NAND Flash
Array OrganizationTwo planes; 1,024 blocks per plane
Error CorrectionOn-die ECC 8 bits per sector, enabled at power-up; minimum required ECC 8 bits per 544-byte sector
Page Read Time25 µs maximum with ECC disabled; 70 µs maximum with ECC enabled
ProgramPage program 200 µs typical ECC off / 220 µs typical ECC on; block erase 2 ms typical
OTP Area10 one-time-programmable pages
Block ProtectionBlocks locked by default after power-up; configure block-lock register before program or erase as required
Package Details8-pin U-PDFN (MLP8), PACKAGE code wb; 8 × 6 × 0.65 mm; 1.27 mm typical pitch

Product Details

MT29F2G01ABAGDWB-IT:G is a 2 Gbit Serial NAND Flash Memory from Micron, supplied in 8-U-PDFN.

It stores data across power loss, written a page at a time and erased in blocks, with the host responsible for the correction the data sheet asks for.

The data sheet gives a rate of 133 MHz maximum; dual/quad I/O cache reads BBh and EBh: 108 MHz maximum, operation from 2.7–3.6 V; 3.3 V nominal, a Two planes; 1,024 blocks per plane organisation, endurance of 100,000 program/erase cycles.

It is the choice where the image or the log is too large for serial flash but the design does not want a managed device.

It is specified over −40 to +85 °C ambient.

It is used where a board has to boot, store data or hold working memory — routers, set-top boxes, handsets, industrial controllers and storage modules all rely on parts of this class.

Quality · Shipping · Payment

Details

Quality Confirmation

Pre-shipment checks cover batch, package, labels and markings. Inspection photos and third-party inspection support are available on request.

Shipping

Worldwide delivery is supported. Carrier, lead time and buyer-appointed forwarder requirements are confirmed with the quotation.

Payment

Payment method, currency and trade terms are subject to the formal quotation or proforma invoice.