AUIPS7111STRL

Mfr. #:
AUIPS7111STRL
Mfr.:
Infineon Technologies
Product Type:
Smart High-Side Power Switch
Series:
High-Current PROFET
Package / Case:
5-D2PAK
Description:
AUIPS7111STRL is an Infineon smart high-side power switch, in a 5-D2PAK package.

Product Attributes

AttributeValue
Nominal Load Current15 A catalogue nominal; 10 A recommended continuous at TA = 85 °C, TJ = 125 °C on 6 cm² D2PAK footprint
Diagnostic FeaturesIFB analog current feedback, 13,000:1 typical ILOAD/IFB at IOUT = 10 A; latched fault indication
ProtectionLatched over-current and over-temperature shutdown, reverse-battery protection, ESD protection and active clamp
Operating Temperature-40 to +150 °C junction
Channels1
Operating Supply Voltage (VCC)8 V to 50 V
RDS(on) typ6 mΩ typical, 7.5 mΩ max at TJ = 25 °C, IDS = 10 A; 15 mΩ max at TJ = 150 °C
QualificationAutomotive (AEC-Q100)
Over-current shutdown30 A min, 45 A typical, 60 A max protection threshold
Ordering formatAUIPS7111STRL: D2PAK-5, tape and reel left
Package DetailsPG-TO263-5, 5 pins

Product Details

AUIPS7111STRL is an Infineon smart high-side power switch, in a 5-D2PAK package.

Current capability is 15 A catalogue nominal; 10 A recommended continuous at TA = 85 °C, TJ = 125 °C on 6 cm² D2PAK footprint, and that is what decides how much of the load the rail can carry before a second stage is needed.

Protection covers Latched over-current and over-temperature shutdown, reverse-battery protection, ESD protection and active clamp, and that stands between a fault on the rail and the parts fed by it.

It runs from 8 V to 50 V and is rated over -40 to +150 °C junction.

It is used in the power path of a board, where the conversion and the protection have to match what the loads downstream can tolerate.

Quality · Shipping · Payment

Details

Quality Confirmation

Pre-shipment checks cover batch, package, labels and markings. Inspection photos and third-party inspection support are available on request.

Shipping

Worldwide delivery is supported. Carrier, lead time and buyer-appointed forwarder requirements are confirmed with the quotation.

Payment

Payment method, currency and trade terms are subject to the formal quotation or proforma invoice.