ADXL355BEZ-RL7

Mfr. #:
ADXL355BEZ-RL7
Mfr.:
Analog Devices
Product Type:
3-Axis MEMS Accelerometer
Series:
ADXL355
Package / Case:
14-LCC
Description:
ADXL355BEZ-RL7 is an Analog Devices 3-axis mems accelerometer, in a 14-LCC package.

Product Attributes

AttributeValue
Sensor Type3-axis (X, Y, Z) MEMS accelerometer with 20-bit digital output
Measurement Range±2 g, ±4 g and ±8 g, user-selectable
Noise Density22.5 µg/√Hz noise spectral density (all axes)
Sensitivity256,000 LSB/g (±2 g), 128,000 LSB/g (±4 g), 64,000 LSB/g (±8 g)
OutputSPI and I²C serial interface; 20-bit ADC output
Supply Voltage2.25 V to 3.6 V with internal regulators
Output Data RateUser-selectable output data rate up to 4 kHz
0 g Offset±25 mg typical 0 g offset
Operating Temperature−40 °C to +125 °C
Package Details14-terminal LCC (E-14-1), 6 mm × 5.6 mm × 2.2 mm; hermetic

Product Details

ADXL355BEZ-RL7 is an Analog Devices 3-axis mems accelerometer, in a 14-LCC package.

Its range of ±2 g, ±4 g and ±8 g, user-selectable sets the largest event it can record without clipping, and 22.5 µg/√Hz noise spectral density (all axes) of noise density sets the smallest motion it can resolve — the two together define the dynamic range the application actually gets.

The conversion is quoted as 256,000 LSB/g (±2 g), 128,000 LSB/g (±4 g), 64,000 LSB/g (±8 g), which is what turns the analog quantity into a number the host can use.

Sampling runs at User-selectable output data rate up to 4 kHz, so the bandwidth of the phenomenon being observed has to fit inside it.

It connects and runs as SPI and I²C serial interface; 20-bit ADC output and 2.25 V to 3.6 V with internal regulators supply.

It is rated over −40 °C to +125 °C.

It is used where motion has to be measured on a board — tilt and orientation, vibration monitoring, impact detection and dead reckoning — and the sensor, not the processor, sets what can be observed.

Quality · Shipping · Payment

Details

Quality Confirmation

Pre-shipment checks cover batch, package, labels and markings. Inspection photos and third-party inspection support are available on request.

Shipping

Worldwide delivery is supported. Carrier, lead time and buyer-appointed forwarder requirements are confirmed with the quotation.

Payment

Payment method, currency and trade terms are subject to the formal quotation or proforma invoice.